Chameleon / Holographic Heat Transfer Vinyl (HTV) with Self-Luminous Effect

Specification:

Composition: Polyurethane (PU) Thickness: 110 microns/0.11 mm (Standard), 300 microns/0.3 mm (Glitter) Carrier sheet: 130 microns /0.13 mm

Heat Press Setting:

1. Preheat the heat press to 305°F (150°C).
2. Place your fabric onto the heat press and preheat it for 5-10 seconds to remove any moisture and wrinkles.
3. Position your design onto the fabric, with the carrier sheet facing up.
4. Apply heat and pressure for 10-15 seconds using medium to high pressure.
5. Peel off the carrier sheet while it is cold.
6. If the vinyl is not fully adhered, repeat steps 4-5 until it is.

Iron-On Setting:

1. Set your household iron to the Cotton/Linen or Wool setting, the highest temperature available, and turn off the steam setting.
2. Preheat the fabric area for 10-15 seconds.
3. Place the weeded image onto the preheated fabric, liner side up, and apply medium to high pressure with the iron for 25-30 seconds.
4. Flip the fabric over and apply medium pressure with the iron to the back of the material for an additional 25-30 seconds.
5. Let the vinyl cool for a few seconds, then gently peel off the carrier sheet while it is still cold.
6. If the vinyl is not fully adhered, repeat steps 4-6 until it is.

Care Instructions:

Wait 24 hours before washing. Handwash the embellished item inside out in cold water. Do not bleach. Do not tumble dry. If necessary, iron the back side of the garment.

Follow these care instructions to maintain the quality and longevity of your heat transfer vinyl project, ensuring your designs shine brightly for years to come.